Skip to main content
Young Collection

Young 27

The Young 27 is a cutting-edge hybrid fishing machine that can venture miles offshore while still running comfortably across bays and shallow flats, drafting just 17 inches. Whether fishing for grouper, sailfish, redfish, or snook, the angler can still fish and run a trolling motor in less than 2 feet of water.

Build My Young 27
  • Starting Price $289,000
  • Length (at centerline) 27'7"
  • Beam 9'4"
  • Draft (loaded) 17"
  • Deadrise (at transom) 20°
  • Deadrise (at bow entry) 60°
  • Weight (w/o engine) 5,900 lbs.
  • Standard Fuel Capacity 160 Gallons
  • Recommended HP Range 400-600 HP
  • Gunwale Width 10"
  • Cockpit Depth (freeboard at aft cockpit) 25"
  • Cockpit Depth (freeboard at fwd cockpit) 29"
  • Cockpit Size 20'5" x 8'7"
  • • Custom single-color hull, all composite, fully self-bailing
  • • Hull bonded with structural adhesive and thru-bolted every 6”
  • • Closed-cell foam filled chambers under cockpit floor
  • • Insulated, gasketed, overboard-draining compartments (nothing drains to bilge)
  • • Stainless and titanium thru-hulls with composite ball valves
  • • Heavy-duty fiberglass anchor locker
  • • Twin Suzuki 300hp 4-stroke (White or Black)
  • • Hydraulic tilt steering with power knobbed finger grip steering wheel
  • • Lenco trim tabs (12×14) with indicator switch
  • • 160-gallon (3/16″) epoxy coated fuel tank with fuel/water separator
  • • Minn Kota iPilot Terrova 36V, 72” shaft with 3 deep cycle batteries, outlet, RAM support arm, and quick-release bracket
  • • Group 31 AGM cranking (2ea) and house (1ea) batteries with automatic battery management system
  • • Dual on board chargers for cranking, house, and trolling batteries (3-Banks)
  • • Two 1500 GPH bilge pumps with float switches
  • • Tinned marine wiring with soldered, epoxy-coated, and heat-shrink sealed connections
  • • Dual SIMRAD NSS12 MFDs with SS175 1kW CHIRP & Active Imaging transducers, and RS-20 VHF with 8ft antenna
  • • Lockable flush-mount electronics panel
  • • Flush-mount compass with backlight
  • • Hard composite T-top with powder coating, E-box, life jacket storage, 11 welded rod holders, 4 cup holders, grab rails, 3 LED spreader lights, and rear support legs
  • • Lockable console side door (port or starboard)
  • • Console with marine EVA foam storage topper & interior LED lighting
  • • Lighted switch panel with breakers and laser-etched switches; includes 12V socket and USB outlet
  • • Fiberglass leaning post tackle station with Plano boxes, leader, knife & plier holders
  • • Deluxe flip-bolster helm bench with armrests
  • • Four Lockable storage drawers (leaning post)
  • • Drop-in bilge hatch compartment with dual bucket recess
  • • Under-gunwale rod racks (holds 8 rods)
  • • Twelve flush mounted stainless rod holders
  • • Eight stainless pull-up cleats and three bow/transom lifting eyes
  • • Raw-water washdown with retractable hose
  • • Custom integrated fish ruler
  • • 50-gal livewell with 1100GPH pump, removable screen & tub light
  • • Two 30-gal baitwells with two 1100GPH pumps, removable screens & tub lights
  • • Three insulated fish boxes (1 forward, 2 aft)
  • • Two mounted fire extinguishers
  • • LED navigation and cockpit lighting
  • • Deep gutter hatch openings with rubber gaskets
  • Anchor Locker
  • Storage/Seating
  • Fish Box
  • Coffin Box
  • Insulated Cooler
  • Console
  • Bilge Access
  • Leaning Post
  • Release Well
  • Baitwell

Design

Hybrid fishing machine bridging inshore and offshore performance. Multiple layout options, including coffin box or forward seating.

Construction

Three-piece, all-composite cored hull with a modified-V design (no tunnel). Twin-engine configuration available with optional extended fuel capacity for longer runs. Self-bailing.

Water Capability

Drafts only 17.” Runs a trolling motor in less than 2 feet of water and handles heavy offshore seas with confidence.

Additional Options & Upgrades

Engine Upgrades *The following are upgrades from the standard Suzuki Twin 300hp 4-Strokes
  • • Upgrade to Mercury Twin 300hp 4.6L V8 (AMS)
  • *choice of color: Cold Fusion White, Pearl Fusion White, Warm Fusion White, Black
  • • Upgrade to Yamaha Twin 300hp 4.2L V6 (DEC) (White or Grey)
  • • Upgrade to Optimus Electric Steering
  • • Dual Hydraulic Jack Plate (6″ with console switch and indicator gauge)
  • • Upgrade trim tabs to Seakeeper Ride System (525)
  • • Upgrade trim tabs to Lenco Pro Control Auto System
Trolling Motor Upgrades & Options *The standard trolling motor is the Minn Kota iPilot Terrova (36V, 72" shaft, Manual Deploy)
  • • Upgrade to Minn Kota iPilot NEW Terrova QUEST (36V, 115lb, 72″, Manual Deploy)
  • • Upgrade to Minn Kota Rip Tide iPilot NEW INSTINCT (36V, 115lb, 72″, Auto Deploy)
  • • Upgrade Minn Kota to 87″
  • • Upgrade to Power-Pole MOVE (36V 100lb, 72″ shaft, Manual Deploy)
  • • Upgrade Power-Pole MOVE to 84″
  • • Upgrade to SIMRAD RECON (36V, 72″ shaft, Manual Deploy)
  • • Upgrade to GARMIN Force Kraken (36V, 75″ shaft, Manual Deploy)
  • • Upgrade to AGM batteries
Trailer
  • • Aluminum Dual Axle Trailer (includes all SS hardware, all LED lights, spare tire assembly
  • with step-on fenders, custom fit “drive-on” bunks, SS brakes and calipers, 16″ Tires, 7.5″ I Beam)
  • • Upgrade beams to C-channel
  • • Aluminum Wheels (includes 5ea)
  • • 5 step bow ladder (integrated into trailer) with grab rail
  • • Upgrade to electric over Hydraulic Brake System
Electronics Package *The standard electronics package includes two Simrad 12" evo 3s MFDs, SS175 1 kW CHIRP transducer, 2-in-1 Active Imaging transducer, and RS-20 VHF with 8ft antenna
  • Marine Stereo Package
  • (Package includes Fusion head unit, four JL Audio 7.7″ speakers mounted in composite enclosures, and one JL Audio amplifier)
  • • Upgrade standard four JL Audio 7.7″ speakers to 8.8″ speakers with upgraded amp
  • • Upgrade – two additional JL Audio 7.7″ speakers with amp
  • • Upgrade – two JL Audio 8″ subs with composite recess and one JL Audio Amplifier
  • • Upgrade – two JL Audio 10″ subs and one JL Audio Amplifier
  • SIMRAD Electronics Package Additions
  • • Upgrade – SIMRAD one upper station 12″ evo 3s MFD
  • • Upgrade – SIMRAD one upper station 9″ evo 3s MFD
  • • Upgrade – SIMRAD WM-4 Sirius-XM Satellite Weather
  • • Upgrade – SIMRAD Autopilot (without display)
  • • Upgrade – SIMRAD Halo 20+ Radar
  • • Upgrade – SIMRAD RS40 VHF (with 8′ antenna and mount)
  • GARMIN Electronics Package Options
  • • Upgrade to GARMIN Electronics Package (Includes two 13″ 9213 MFDs, B175 1 kW thru hull CHIRP transducer, Side & Downscan transducer, 115VHF with 8ft antenna. Includes all wiring and installation.)
  • • Upgrade – GARMIN one upper station 13″ 9213 MFD
  • • Upgrade – GARMIN one upper station 10″ 9010 MFD
  • • Upgrade – GARMIN GXM-54 Sirius-XM Satellite Weather
  • • Upgrade – GARMIN Grid 20 Keyed Wired Remote
  • • Upgrade – GARMIN Autopilot (without display)
  • • Upgrade – GARMIN GMR XHD 18″ Radar (includes all wiring and installation)
  • • Upgrade – GARMIN GMR XHD 24″ Radar (includes all wiring and installation)
  • • Upgrade – GARMIN upgrade radar to Fantom
  • • Upgrade – GARMIN 215 VHF (with 8′ antenna and mount)
  • • EPIRB (ACR V5 Cat II, with bracket)
  • • Upgrade manual fold-down VHF antenna mount to crank operated mount with crank under hard top
  • • Sionyx Nightwave analog camera

 

Aluminum Fabrication *The standard is the Hard T-top with powder coating, E-box, life jacket storage, 11 rod holders, 4 drink holders, grab rails, 3 LED spreader lights, and rear support legs
  • • Upgrade to Half Tower (hard top shade with built in storage box, manual pass thru, life jacket storage, digital throttle, hydraulic steering, wrap around cushion, footrest, 13 welded rod holders, 4 welded drink holders, rear support legs and powder coating)
  • • Upgrade Half Tower to Electric Pass Thru
  • • Fold Down Radar Mount
  • • Removable Crows Nest (with ladder)
  • • Upgrade Hard Top Frame to D-Tubing (with powder coating)
  • • Upgrade Half Tower Frame to D-Tubing (with powder coating)
  • • 3-sided Fixed Glass (integrated into D-Tubing)
  • • Additional Welded Rod Holders
  • • Additional Welded Drink Holders
  • • Upgrade to YETI Cup Holders
Anchoring
  • • 10′ Power-Pole (with wireless remote)
  • • Dual Power-Pole Brackets (mount to side of jack plate)
  • • Single Power-Pole Bracket Yamaha/Suzuki (sandwich brackets)
  • • Single Power-Pole Bracket Mercury (sandwich brackets)
  • • Sea Claw Anchor package (12lb Sea Claw, 15′ chain, and 300′ rope)
Fishing & Rigging
  • • Carbon Fiber Outriggers (22′)
  • • Carbon Fiber Outriggers (18′)
  • • Additional SS Rod Holders (flush mounted on deck cap) – (pair)
  • • Rod Holder Cup Holder Combo’s –  (pair)
  • • Console Nets
  • • Console Hooks
  • • Polymer Storage Cabinets (mounted on interior console side wall)
  • • Electric Reel Outlet
  • • Removable Cutting Board (fits in middle 2 aft rod holders)
  • • Upgrade one tackle cabinet to drawers or trash can
Upholstery & Seating
  • • Forward Seating with cushions & swing-out backrests
  • • Upgrade to removable D Shape backrest
  • • Forward Table (adjustable and removable)
  • • Coffin Box (300qt with seat and backrest cushions)
  • • Coffin Box Armrests
  • • Three Piece Aft Bench Seat with Dual Removable Backrests
  • • Bolster Cushions
  • • Bow Cushion for Forward Table
  • • Upgrade Upholstery to Two-Tone
  • • Upgrade Upholstery to Double Diamond Stitching
Covers & Enclosures
  • • Custom Full Boat Cover (choice of color) (covers down to rubrail)
  • • Extended Sides (full boat cover) (covers from rubrail down to chine)
  • • Combo Cover (console and lean post) (choice of color)
  • • Console Cover (choice of color)
  • • Upper Console Cover (choice of color)
  • • Lean Post Cover (choice of color)
  • • Cowling Cover (choice of color)
  • • Removable Shade System (choice of color)
  • • Isinglass (full enclosure)
  • • Isinglass Side Wings
  • • Poly Carbonate (full enclosure)
Lighting & Plumbing
  • • Deluxe Enclosed Head with Porcelain Toilet and Pump Out
  • • Porta Potty (mounted in console)
  • • Re-Circulating Live Well Pump
  • • Freshwater Washdown (20 gallon)
  • • Additional Spreader Light (LED)
  • • Underwater Light (Pair – LED)
  • • Upgrade underwater lights to Spectrum
  • • Upgrade cockpit lights to Spectrum
  • • Light Bar mounted on leading edge of hard top
  • • Clear Acrylic Release Well or Baitwell Lid (with etched logo)
  • • Electric Horn
Deck & Utility
  • • Bottom Paint (includes epoxy primer and antifouling paint)
  • • Pull-Out Ladder (4-step)
  • • Dive Platform (with fold-down 3-step ladder)
  • • Transom Pass Thru (includes composite swing door) – stb side only
  • • Helm Pad (choice of color)
  • • Splash well (choice of color)
  • • Under Gunnel Pads (set of 2, with Young logo; choice of color)
  • • Auxiliary Fuel Tank (60 gallon, under coffin box)
T-Top Coffin Box - January 2026

Coffin Box 2

Coffin Box

Console 2

Console

Front Aerial

Fwd Step

Helm Chair

Rear Deck

Side Aerial

Side Angle

Subwoofers

Tackle Station

Transom Aerial

Transom

Windshield

T-Top with Folding Crows Nest - November 2025

Forward Seating 2

Forward Seating

Front Deck

Hardtop

Helm Seat

Leaning Post Rear

Bolsters

Clear Baitwell

Console Front

Dive Platform

Fixed Glass

Folding Crows Nest

Rear Deck 2

Rear Deck

Side Profile

Transom Aerial

Transom

Half Tower Forward Seating - March 2025

Side aerial

Front aerial

Rear aerial

Upper station

Upper helm

Rear deck with cutting tray

Lean post trash can

Hull side

Helm seating

Fwd table seating

Fwd table seating

Electronics cabinet

Console storage

Console front view

Cockpit

Half Tower Forward Seating - March 2025

Side aerial

Front aerial

Rear aerial

Sunroof

Release well

Rear removable seating

Rear cutting board

Helm seat

Fwd table

Fwd shade

Front view upper station

Front tower isinglass

Cooler seating

Console

Cockpit

T-Top with Crows Nest Forward Seating - January 2025

Side aerial

Front aerial

Upper crows nest

Upper crows nest folded down

Tower with glass

Side tower with glass

Side cockpit

Rear tower

Rear removable seating

Rear lean post ladder

Rear deck with cutting board

Life jacket storage

Helm

Helm seating

Fwd seating

Front deck

Console storage

Console cooler seating

T-Top Forward Seating - November 2024

Side aerial

Fwd aerial

Splashwell

Rocket launcher no legs

Rear seating

Rear removable seating

Mid cockpit

Helm seating

Helm seating

Fwd tower

Fwd seating with table insert

Front deck

Front deck with cushions

Cooler seating

Console with extended windshield

T-Top Coffin Box - October 2024

Side aerial

Front aerial

Rear aerial

Tower with isinglass

Tower with isinglass

Rear tower

Splashwell

Rear tackle station

Rear removable seating

Rear deck

Life jacket storage

Helm seating

Helm seating

Fwd shade

Floor fishbox

Console

Dive platform

Coffin box cushion

T-Top Coffin Box - October 2024

Side aerial

Front aerial

Rear aerial

Tower with isinglass

Rear tower rodholders

Side cockpit with bolsters

Rear deck

Life jacket storage

Helm seating

Hardtop fwd

Console

Floor fishbox

Coffin box

Coffin box open with divider

Bilge access

Aft tackle station

See it in Action

Building Boats — and a Family of Satisfied Owners.

When I visited Young Boats for the first time, it felt like I was part of a family. The quality and workmanship of their custom boat building is truly amazing. My Young 27 has surpassed all my expectations. Its ability to take on the big blue water with the comfort of a much larger boat is jaw dropping.”

Daniel DeLaTorre Repeat Customer

Start Your Journey

Share your information below.
Or call us at (352) 447-1330

This field is for validation purposes and should be left unchanged.
Address (Optional)